Lexmark Drum Reset Instructions
Lexmark E260 Drum reset procedure Install the toner cartridge into the new/re-manufactured drum unit. With the front door still open, Press and hold the “X” Button for 5 seconds. On the E260 the lights will cycle. Close the front door. Lexmark E340/E342 Drum reset procedure Turn the printer off. With the printer still off, press and hold the SELECT and RETURN buttons. While still holding the buttons down, turn the printer back on. Keep holding them down until the screen shows
Dell Drum Reset Instructions
Dell 1125 Drum reset RESETTING THE DRUM COUNTER
1. Press “SCROLL” to select “SETUP” and press “SELECT”
2. Press “SCROLL” to select “MAINTENANCE” and press “SELECT”
3. Press “SCROLL” to select “RESET DRUM CNT” and press “SELECT”
4. Press “SCROLL” to select “YES” and press “SELECT”
5. The display states: “SAVED” and the counter is reset. Dell 1700/1710 Drum reset procedure With the printer on, press and hold the CANCEL button until all lights flash in sequence then release
Brother Drum Reset Instructions
Brother DR 520 Drum reset procedure To reset: Make sure the machine is turned on and the drum LED is blinking. Open the front cover. Press and hold the "Go" button for four seconds until all the LEDs light up. Once all the LEDs are lit, release the "Go" button. Close the front cover. The counter is reset. Drum Life Low warning: Drum light blinking, Green Status Light on: Drum life over soon—around 6% life remaining (1500p)—printer does not stop at any point. Status page,
